Acoustical Tile Installer

Description

Summary Plans and erects Acoustical Ceilings and Soffits in commercial and industrial buildings by performing the following duties.

Essential Duties and Responsibilities includes but is not limited to the following. Other duties may be assigned.

• Rolls out power cords and checks out tools and equipment needed for daily tasks
• Inventories materials, tools and equipment at the beginning and end of shift
• Able to read blueprints
• Ability to layout any ceiling or soffit on the job
• Able to set up and use spinning laser
• Provide layout and opening for any and all penetrations in ceiling system
• Measure, cut and install wall angle, wires, mains, tees, pop rivets, clips, seismic pods, seismic wire and cut clean tile
• Have some knowledge of code requirements
• Keep all ceilings flat and square
• May have to build trapeze supports for wire layout
• Set up and break down scaffolding
• Walk stilts (very helpful)
• Stock and clean up
• Must have knowledge of industrial standards

Competencies To perform the job successfully, an individual should demonstrate the following competencies:

Oral Communication – Speaks clearly and persuasively in positive or negative situations; Listens and gets clarification; Responds well to questions; Demonstrates group presentation skills.

Diversity – Demonstrates knowledge of EEO policy; Shows respect and sensitivity for cultural differences; Educates others on the value of diversity; Promotes a harassment-free environment; Builds a diverse workforce.

Ethics – Treats people with respect; Works with integrity and ethically; Upholds organizational values.

Organizational Support – Follows all company policies and procedures.

Planning/Organizing – Prioritizes and plans work activities; Uses time efficiently.

Quality – Demonstrates accuracy and thoroughness; Monitors own work to ensure quality.

Quantity – Meets productivity standards; Completes work in timely manner; Strives to increase productivity.

Safety and Security – Observes safety and security procedures; Follows all Federal, State and Local Safety Regulations; Reports potentially unsafe conditions; Uses equipment and materials properly.

Attendance/Punctuality – Is consistently at work and on time.

Dependability – Follows instructions, responds to management direction in a positive and professional manner.

Qualifications To perform this job successfully, an individual must be able to perform each essential duty satisfactorily. The requirements listed below are representative of the knowledge, skill, and/or ability required. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions.

Education and/or Experience Must have own tools for chosen trade as per attached list; Must have knowledge and certification to use saws, screw guns, lasers, and powder actuated tools; Must have knowledge of setting up and breaking down scaffolding.

Physical Demands The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions.

While performing the duties of this Job, the employee is regularly required to stand; walk; use hands to finger, handle, or feel and reach with hands and arms. The employee is frequently required to climb or balance and stoop, kneel, crouch, or crawl. The employee is occasionally required to sit and talk or hear.

The employee must regularly lift and /or move up to 50 pounds and occasionally lift and/or move up to 100 pounds. Specific vision abilities required by this job include close vision, distance vision, color vision, peripheral vision, depth perception and ability to adjust focus.

Work Environment The work environment characteristics described here are representative of those an employee encounters while performing the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions.

While performing the duties of this Job, the employee is regularly exposed to moving mechanical parts; fumes or airborne particles. The employee is frequently exposed to high, precarious places. The employee is occasionally exposed to humid conditions; outside weather conditions; risk of electrical shock and vibration. The noise level in the work environment is usually loud. Safety glasses and ear plugs are required to be worn on the job site at all times.

ACT Tool List

• Tools Bags or Pouches and Belt
• Tape Measure (25′-30′)
• Pencil, Sharpie
• Chalk Line
• Hammer
• Awl
• Screw Driver or Drill and Impact Gun*
• Sheet Metal Punch
• Aviation Snips
• Wire Cutting, Pliers, Dykes
• Utility Knife
• Level (pocket laser, spinning laser*
• Jet Line or String
• Key Hole Saw
• Compass or Dividers
• Stilts*
• Viper Gun and Pole*
• Lag Pole*
• Drill for Lag Pole*
• Powder Actuated Fastener*
• Pop Rivet Set*
• Hard Hat, Boot, Safety Glasses and Gloves
• Ladders, Scaffolding*

*Not Required for Hire

Company Supplied

• Cord Reel or Lead Power
• Scaffold, Bakers, Lifts
• Lasers, Shot Guns, Chop Saws, Rotor Hammer, Double Cuts
• All Rental or Specialty Tools-Required for our projects